Steel Industry Sintering Plant Dioxin Control and Emission Standards Article 7
The temperature of exhaust gas at the inlet of the dust collection equipment in the sintering plant smelting process shall be maintained at less than 200 degrees Celsius. Monitoring facilities shall be installed for the real-time display of the exhaust gas temperature.During the normal operation of the sintering plant of the foregoing paragraph dioxin pollution prevention equipment shall be maintained at the operating conditions of the most recent sampling and analysis period that met dioxin emission standards. When the operating conditions of a sintering plant change, another dioxin sampling and analysis shall be conducted in order to adjust the operating conditions thereof.
中文原文 鋼鐵業燒結工場戴奧辛管制及排放標準第7條
燒結工場冶煉過程中集塵設備入口廢氣溫度，應在攝氏二○○度以下，並應具備即時顯示之廢氣溫度監測設施。
前項燒結工場正常運作時之戴奧辛污染防制設備應維持最近一次採樣分析，符合戴奧辛排放標準期間之操作條件。
其操作條件有變更時，應重新進行戴奧辛採樣分析，以調整其操作條件。
前項燒結工場正常運作時之戴奧辛污染防制設備應維持最近一次採樣分析，符合戴奧辛排放標準期間之操作條件。
其操作條件有變更時，應重新進行戴奧辛採樣分析，以調整其操作條件。