Steel Industry Sintering Plant Dioxin Control and Emission Standards Article 6
The concentrations of dioxin pollutants in sintering plant stack emissions shall be calculated based on non-diluted dry emission volumes at a temperature of 273K and a pressure of 1 atmosphere. Moreover, they shall be corrected to 15% Standard Oxygen Basis. The correction formula is as follows: 21－15C = ─────．CS 21－Os“C” means the pollutant concentration corrected to Standard Oxygen Basis, measured in ng-TEQ/Nm3.“Cs” means measured the pollutant concentration based on test method, not corrected to Standard Oxygen Basis, measured in ng-TEQ/Nm .“Os” means the actual measured emission oxygen content. Concentrations that are higher than 20% shall be calculated as 20%.
中文原文 鋼鐵業燒結工場戴奧辛管制及排放標準第6條
燒結工場排氣煙道中戴奧辛污染物之濃度計算均以凱氏溫度二七三度及一大氣壓下未經稀釋之乾燥排氣體積為計算基準，並以排氣含氧量十五％為參考基準，校正公式如下：21－15C=─────．CS21－OsC：指經含氧量參考基準校正之污染物濃度，單位為ng-TEQ/Nm³。
CS：指依測定方法測得，未經含氧量參考基準校正之污染物濃度，單位為ng-TEQ/Nm³。
Os：指排氣中含氧量實測值。
其大於二○％者，以二○％計算。
CS：指依測定方法測得，未經含氧量參考基準校正之污染物濃度，單位為ng-TEQ/Nm³。
Os：指排氣中含氧量實測值。
其大於二○％者，以二○％計算。