Cosmetics Good Manufacturing Practice Regulations Article 26
The equipment calibration in the cosmetics manufacturing premises shall be regulated as follows:1. Laboratory and production measuring instruments related to production quality shall be calibrated regularly.2. If calibration results of measuring instruments do not meet the acceptance criteria, those shall be identified specifically and removed from service.3. The condition set forth in the preceding subparagraph shall be investigated to confirm the impact to the production quality and to take appropriate measures afterwards according to the investigation result.
中文原文 化粧品優良製造準則第26條
化粧品製造場所之設備校正，應依下列規定辦理：
一、與產品品質有關之實驗室用及生產用之量測儀器，予以定期校正。
二、校正結果不符合允收基準之量測儀器，予以適當識別並停用。
三、調查前款情形，確認對產品品質之影響，並採取適當措施。
一、與產品品質有關之實驗室用及生產用之量測儀器，予以定期校正。
二、校正結果不符合允收基準之量測儀器，予以適當識別並停用。
三、調查前款情形，確認對產品品質之影響，並採取適當措施。