Regulations Governing the Application for Prior Release of Mechanical Products Article 3
Applications for prior release of products under any of the following circumstances shall be denied:1. If the same type of products were not shipped back, destroyed, dissembled to unusable conditions, or disposed of by other necessary measures within 6 months from the date of the noncompliance notice of type certification.2. If the same obligatory applicant failed to obtain certificate of type certification for the same type of products within 1 year from the date of prior release notice, and the products were not shipped back, destroyed, dissembled to unusable conditions, or disposed of by other necessary measures. Where extended time is granted for the application for type certification, the extended time limit shall apply.3. If there are safety concerns.
中文原文 機械類產品申請先行放行辦法第3條
前條機械類產品有下列情形之一者，不得核准先行放行：
一、經型式驗證不合格之同一型式產品，未於驗證不合格日起六個月內完成退運、銷燬或拆解至不堪用等必要處置。
二、同一報驗義務人之同一型式產品經中央主管機關核准先行放行，未於核准日起一年內取得型式驗證合格證明書，且未完成退運、銷燬或拆解至不堪用等必要處置。
但經核准展延驗證期限者，以該期限屆滿時為準。
三、產品顯有安全顧慮情事。
一、經型式驗證不合格之同一型式產品，未於驗證不合格日起六個月內完成退運、銷燬或拆解至不堪用等必要處置。
二、同一報驗義務人之同一型式產品經中央主管機關核准先行放行，未於核准日起一年內取得型式驗證合格證明書，且未完成退運、銷燬或拆解至不堪用等必要處置。
但經核准展延驗證期限者，以該期限屆滿時為準。
三、產品顯有安全顧慮情事。