Regulations Governing the Surveillance of Machinery, Equipment and Tools Article 15
The central competent authority or the labor inspection body shall investigate on products that are likely to violate related regulations when it performs market checks.The means of investigation shall be:1. To make inquiry to the person subject to inspection or related persons and request for supply of relevant supporting documents,2. To investigate at the site mentioned in subparagraph 2, Article 2 and sample products that are likely to violate related regulations for inspection, or ask the person subject to inspection to provide products that are of the same type with suspect products for testing, and3. To seal products that are likely to violate regulations, where necessary, and put the products in the custody of the person subject to inspection or deliver the products to designated places after the person subject to inspection draws up proof documents or affidavit concerning the status of these sealed products.
中文原文 機械設備器具監督管理辦法第15條
中央主管機關或勞動檢查機構執行市場查驗時，發現疑有違規之產品，應進行調查。
前項調查之方式如下：
一、向受查驗者或相關業者查詢，並得要求其提供相關佐證資料。
二、於第二條第二款所列之場所進行調查，並得對可疑產品取樣檢驗，或請受查驗者提供與疑有違規產品同型式之產品送驗。
三、必要時，得封存疑有違規產品，並於受查驗者填具進貨證明及保管書後，將產品交其具結保管或運存指定處所。
前項調查之方式如下：
一、向受查驗者或相關業者查詢，並得要求其提供相關佐證資料。
二、於第二條第二款所列之場所進行調查，並得對可疑產品取樣檢驗，或請受查驗者提供與疑有違規產品同型式之產品送驗。
三、必要時，得封存疑有違規產品，並於受查驗者填具進貨證明及保管書後，將產品交其具結保管或運存指定處所。