Standards for Establishing Places for Manufacturing, Storing, Processing Public Hazardous Substances and Flammable Pressurized Gases, and Regulations on Safety Control of such Places Article 69

The location, construction, equipment, and safety management of flammable pressurized gas processing place shall meet the following requirements:1.The trading place:(1)It shall be located on the ground floor of a building.(2)The area of the building used for trading shall meet the following:i.The walls shall be constructed from fireproof materials or non-flammable materials. However, the partitioning walls used to separate this area from other areas of the building shall be made from fireproof construction.ii.The beams and ceilings shall be constructed from non-flammable materials.iii.In cases where there is an upper floor, its floor shall be made from fireproof construction. In the absence of an upper floor, the roof shall be built with fireproof construction or non-flammable materials.(3)Any fire source is forbidden.(4)A gas leak alarm shall be installed when the gas storage capacity is greater than 80kg.2.The container inspection place:(1)It shall meet the requirements set forth in Article 68.1, 68.2.(2)A gas leak alarm shall be installed in facilities where there is potential leakage possibility of liquefied petroleum gas.(3)An automatic emergency shutoff device shall be installed in places that use gas appliance.(4)Any fire source is forbidden except for when it is required for inspection.