Administrative Regulations for Radioactive Material and Equipment Capable of Producing Ionizing Radiation and Associated Practice Article 19
Paragraph 19.1For unsealed radioactive material or re-packaged and labeled radioactive material whose use requires a permission, applicants shall fill out an application form, enclose the following documents and make an application to the competent authority for review and approval, after which the installation permission will be granted:1.a photocopy of the certification of establishment or the registration approved; waived for government agencies (institution);2.photocopies of the relevant operating personnel credentials and the certificates of employment;3.workplace radiation safety assessment;4.a radiation protection plan and radiation safety operation guidelines;5.for the labeling of radioactive material, information on the physical and chemical properties of the radioactive material as well as on the handling process used shall be submitted; and6.in conformity with the stipulations in the Standards for Establishment of Radiation Protection Management Organizations and Radiation Protection Personnel, photocopies of the certificates of radiation protection personnel shall be enclosed.Paragraph 19.2Only after the applicants referred to in the preceding paragraph have obtained the installation permission can the shield engineering installation begin in accordance with the officially approved workplace radiation safety assessment. Within 30 days after completion of the installation, a radiation safety survey report is to be enclosed to the competent authority for review, inspection and approval, after which the permit for use will be issued.
中文原文 放射性物質與可發生游離輻射設備及其輻射作業管理辦法第19條
使用應申請許可之非密封放射性物質或分裝、標誌放射性物質者，申請人應填具申請書，並檢附下列文件，向主管機關申請審查合格後，發給安裝許可：
一、經核准設立或登記之證明文件影本。
政府機關（構）免附。
二、相關操作人員證明文件影本及在職證明。
三、作業場所輻射安全評估。
四、輻射防護計畫及輻射安全作業守則。
五、從事標誌放射性物質者，應提送放射性物質之物理、化學性質及相關處理程序。
六、符合輻射防護管理組織及輻射防護人員設置標準規定者，應另檢附輻射防護人員認可證書影本。
前項申請人取得安裝許可後，始得依核准之作業場所輻射安全評估進行安裝屏蔽工程。
工程完竣後三十日內，檢附測試報告，送主管機關審查及檢查合格後，發給使用許可證。
一、經核准設立或登記之證明文件影本。
政府機關（構）免附。
二、相關操作人員證明文件影本及在職證明。
三、作業場所輻射安全評估。
四、輻射防護計畫及輻射安全作業守則。
五、從事標誌放射性物質者，應提送放射性物質之物理、化學性質及相關處理程序。
六、符合輻射防護管理組織及輻射防護人員設置標準規定者，應另檢附輻射防護人員認可證書影本。
前項申請人取得安裝許可後，始得依核准之作業場所輻射安全評估進行安裝屏蔽工程。
工程完竣後三十日內，檢附測試報告，送主管機關審查及檢查合格後，發給使用許可證。