Enforcement Rules of the Nuclear Materials and Radioactive Waste Management Act Article 14
The operators of nuclear source material or nuclear fuel production facilities shall have any of the following qualifications, and shall hold the qualified certificates granted by the competent authority:1.Graduated from science, engineering, agriculture or medicine departments of colleges or having equivalent educational level, qualified in training, and having practiced in the field for over 3 months or having participated in the whole course of trial operation.2.Graduated from senior high schools or vocational schools or having equivalent education level, qualified in training, and having practiced in the field for over 6 months or having participated in the whole course of trial operation.The above-mentioned training includes qualification acquisition training and on-job retraining, and the training hours are as follows:1.Qualification acquisition training:(1)The total training hours of an operator running nuclear source material production facility shall be not less than 60 hours, among which the training of facility system and operation procedure shall account for at least 40 hours, and the radiation safety training at least 20 hours. And the operator shall pass the exam.(2)The total training hours of an operator running nuclear fuel production facility shall be not less than 240 hours, among which the training of facility system and operation procedure shall account for at least 200 hours, and the radiation safety training at least 40 hours. And the operator shall pass the exam.2.On-job retraining: the hours of on-job training shall be not less than 1/10 of that of the above-mentioned qualification acquisition training every year, and the operator shall pass the exam.
中文原文 放射性物料管理法施行細則第14條
核子原料或核子燃料生產設施運轉人員，應具有下列資格之一，並經主管機關發給合格證明書，始得負責操作：
一、專科以上學校理、工、農、醫系、科畢業或同等學力，經訓練合格，於現場實習三個月以上或全程參與試運轉者。
二、高中（職）以上學校畢業或同等學力，經訓練合格，於現場實習六個月以上或全程參與試運轉者。
前項訓練，包括資格取得訓練及現職運轉人員再訓練；其訓練時數如下：
一、資格取得訓練：
（一）核子原料生產設施運轉人員訓練總時數應在六十小時以上，其中設施系統及操作程序之訓練時數應在四十小時以上，輻射安全訓練時數應在二十小時以上，並應經測驗合格。
（二）核子燃料生產設施運轉人員訓練總時數應在二百四十小時以上，其中設施系統及操作程序之訓練時數應在二百小時以上，輻射安全訓練時數應在四十小時以上，並應經測驗合格。
二、現職運轉人員再訓練：每年再訓練之時數，應為前款資格取得訓練時數之十分之一以上，並應經測驗合格。
一、專科以上學校理、工、農、醫系、科畢業或同等學力，經訓練合格，於現場實習三個月以上或全程參與試運轉者。
二、高中（職）以上學校畢業或同等學力，經訓練合格，於現場實習六個月以上或全程參與試運轉者。
前項訓練，包括資格取得訓練及現職運轉人員再訓練；其訓練時數如下：
一、資格取得訓練：
（一）核子原料生產設施運轉人員訓練總時數應在六十小時以上，其中設施系統及操作程序之訓練時數應在四十小時以上，輻射安全訓練時數應在二十小時以上，並應經測驗合格。
（二）核子燃料生產設施運轉人員訓練總時數應在二百四十小時以上，其中設施系統及操作程序之訓練時數應在二百小時以上，輻射安全訓練時數應在四十小時以上，並應經測驗合格。
二、現職運轉人員再訓練：每年再訓練之時數，應為前款資格取得訓練時數之十分之一以上，並應經測驗合格。