Regulations Governing Compliance Approval for Controlled Telecommunications Radio-Frequency Devices Article 18
A CTRFD that has been issued compliance approval certificate and for which the use of compliance approval label or DoC label is licensed shall not be sold until the following process has been followed:1. The compliance approval label or DoC label and model number are indicated on the body where it is clearly visible, and the logo of the competent authority on the packaging. For final products, the compliance approval label of non-plug-and-play radio-frequency module（component）and the model number of final product shall be indicated on the body where it is highly visible, and the mark of the competent authority on the package box.2. Warning（s）in traditional Chinese shall be indicated at the location specified by the competent authority in the applicable technical specifications.For difficulty of indicating labels, model number or warnings in traditional Chinese mentioned in the preceding paragraph, the indication shall be done as approved by the competent authority, provided that the approval of the competent authority has been obtained.For CTRFDs that are equipped with a built-in screen or are required to connect to a screen for operations, the label, model number or warnings in traditional Chinese may be replaced with display on screen and the operating instructions shall be provided on package box, or in user’s manual or instructions.For those that are not processed according to the three preceding paragraphs, the competent authority or the original certification body may request for an explanation and corrective action to be undertaken within a prescribed period of time and temporary termination of sales. Sales shall not resume until the correction has been confirmed.For CTRFDs that are for private use and have been approved, the applicant shall attach the compliance approval label on the device body where it is clearly visible; failure to do so shall result in the competent authority informing the applicant to undertake corrective action within a prescribed period of time. The device shall not be used until the correction has been confirmed.
中文原文 電信管制射頻器材審驗管理辦法第18條
電信管制射頻器材取得審驗證明者、被授權使用審驗合格標籤或符合性聲明標籤者，應依下列規定辦理，始得販賣：
一、於本體明顯處標示審驗合格標籤或符合性聲明標籤及其型號，並於包裝盒標示主管機關標章。
最終產品應於本體明顯處標示非隨插即用射頻模組（組件）之審驗合格標籤及最終產品型號，並於包裝盒標示主管機關標章。
二、依主管機關或相關技術規範規定於指定位置標示正體中文警語。
前項標籤、型號或正體中文警語標示顯有困難，經主管機關核准者，應依主管機關核准方式標示。
電信管制射頻器材內建螢幕或須連接螢幕始能操作者，第一項標籤、型號或正體中文警語標示得以螢幕顯示代之，並於包裝盒、使用手冊或說明書載明操作方式。
未依前三項規定辦理者，主管機關或原驗證機構得通知其敘明理由，並令其限期改正及暫行停止販賣。
經改正後，始得販賣。
自用電信管制射頻器材經審驗合格者，申請者應將審驗合格標籤標示於器材本體明顯處，未標示者，主管機關得通知其限期改正。
經改正後，始得使用。
一、於本體明顯處標示審驗合格標籤或符合性聲明標籤及其型號，並於包裝盒標示主管機關標章。
最終產品應於本體明顯處標示非隨插即用射頻模組（組件）之審驗合格標籤及最終產品型號，並於包裝盒標示主管機關標章。
二、依主管機關或相關技術規範規定於指定位置標示正體中文警語。
前項標籤、型號或正體中文警語標示顯有困難，經主管機關核准者，應依主管機關核准方式標示。
電信管制射頻器材內建螢幕或須連接螢幕始能操作者，第一項標籤、型號或正體中文警語標示得以螢幕顯示代之，並於包裝盒、使用手冊或說明書載明操作方式。
未依前三項規定辦理者，主管機關或原驗證機構得通知其敘明理由，並令其限期改正及暫行停止販賣。
經改正後，始得販賣。
自用電信管制射頻器材經審驗合格者，申請者應將審驗合格標籤標示於器材本體明顯處，未標示者，主管機關得通知其限期改正。
經改正後，始得使用。