Regulations Governing Compliance Approval for Controlled Telecommunications Radio-Frequency Devices Article 17
Regarding a complete final product assembled using a complete RF module（component）and issued with a compliance approval, those that have been issued an approval certificate for the complete RF module（component）shall submit the brand, model number and electronic files of appearance photographs to the original certification body for registration prior to complete product being sold.In the case where those that have been issued an approval certificate for a complete RF module（component）permits others for the use of the compliance approval label, those that have been issued the approval certificate for the complete RF module（component）shall provide an electronic file that contains the brand, model number and appearance photographs of the complete final product to the original certification body for registration after the complete final product has been assembled with the complete RF module（component）.For the application for registration to the original certification body as mentioned in the preceding two paragraphs, 4×6” color photographs of the complete final product assembled with the complete RF module（component）showing at least two sides of the product and its interior and circuit board with scale shall be provided. The major elements on the circuit board shall be clearly identifiable.For the registration mentioned in Paragraphs 1 and 2 above, such registration shall be assumed by the competent authority or a certification body appointed by the competent authority, in case the original certification body ceases to provide such registration services momentarily or permanently.For products that are not processed according to Paragraphs 1 through 3, the competent authority may request corrective action to be undertaken within a prescribed period of time and temporary termination of sales. Sales shall not resume until the correction has been confirmed.
中文原文 電信管制射頻器材審驗管理辦法第17條
以取得審驗證明之完全射頻模組（組件）組裝成完全最終產品後，取得該完全射頻模組（組件）之審驗證明者，應於該完全最終產品販賣前，檢附標註完全最終產品廠牌、型號及外觀照片之電子檔案，向原驗證機關（構）登錄。
以完全射頻模組（組件）取得審驗證明者，授權他人使用其審驗合格標籤，於完全射頻模組（組件）組裝成完全最終產品後，取得該完全射頻模組（組件）之審驗證明者應檢附標註完全最終產品廠牌、型號及外觀照片之電子檔案，向原驗證機關（構）登錄。
前二項向原驗證機關（構）申請登錄時，應提供組裝該完全射頻模組（組件）之完全最終產品或其內部及電路板4ｘ6吋以上具尺規之至少二面彩色照片，電路板主要元件須清晰可辨讀。
第一項及第二項登錄作業，原驗證機構暫停或終止審驗工作者，由主管機關或主管機關指定之驗證機構辦理。
未依第一項至第三項規定辦理者，主管機關得通知其限期改正及暫行停止販賣。
經改正後，始得販賣。
以完全射頻模組（組件）取得審驗證明者，授權他人使用其審驗合格標籤，於完全射頻模組（組件）組裝成完全最終產品後，取得該完全射頻模組（組件）之審驗證明者應檢附標註完全最終產品廠牌、型號及外觀照片之電子檔案，向原驗證機關（構）登錄。
前二項向原驗證機關（構）申請登錄時，應提供組裝該完全射頻模組（組件）之完全最終產品或其內部及電路板4ｘ6吋以上具尺規之至少二面彩色照片，電路板主要元件須清晰可辨讀。
第一項及第二項登錄作業，原驗證機構暫停或終止審驗工作者，由主管機關或主管機關指定之驗證機構辦理。
未依第一項至第三項規定辦理者，主管機關得通知其限期改正及暫行停止販賣。
經改正後，始得販賣。