Regulations Governing the Implementation and Monitoring of Type Certification for Mechanical Products Article 46
Under any of the following circumstances involving the obligatory applicant, the central competent authority shall rescind the certificate of type certification:1.where the inspection results of purchased products or sampled products do not comply with the standards of type certification,2.where the certificate of type certification, technical files or samples are not provided within the notified time limit or are not intended to be provided without justified reasons,3.where the certified product causes significant hurt or damages due to defects,4.where the products do not comply with labeling requirements and corrective actions are not taken within the notified time limit,5.where the declaration of conformity and technical files of type-certified products are not maintained for the specified time period in accordance with the provisions of Article 14,6.where the provisions of Article 17 are violated because the products are different from those stated in the certificate of type certification and corrective actions are not completed within the notified time limit,7.where the re-issuance of certificate of type certification against revised certification standards is not completed within the specified time limit in accordance with Article 18,8.where the production premises of certified products do not comply with the conformity assessment procedures at the production stage,9.where the certification fees are not paid within the notified time limit,10.where type certification is no longer required for the product item, or11.where the violations are considered significant by the central competent authority.
中文原文 機械類產品型式驗證實施及監督管理辦法第46條
報驗義務人有下列情事之一者，中央主管機關應廢止型式驗證合格證明書：
一、經購樣、取樣檢驗結果不符合型式驗證實施標準。
二、經限期提供型式驗證合格證明書、技術文件或樣品，無正當理由拒絕提供或屆期仍未提供。
三、驗證合格產品因瑕疵造成重大傷害或危害。
四、產品未符合標示規定，經通知限期改正，屆期未改正。
五、未依第十四條規定期限保存經型式驗證之產品符合性聲明書及技術文件。
六、違反第十七條規定，產品與型式驗證合格證明書所載不符，經通知限期改正，屆期未改正完成。
七、經依第十八條規定，限期依修正後驗證標準換發型式驗證合格證明書，屆期未完成。
八、驗證合格產品生產廠場不符合製造階段之符合性評鑑程序。
九、未繳納驗證規費，經通知限期繳納，屆期未繳納。
十、產品經公告廢止實施型式驗證。
十一、其他經中央主管機關認定違規情節重大者。
一、經購樣、取樣檢驗結果不符合型式驗證實施標準。
二、經限期提供型式驗證合格證明書、技術文件或樣品，無正當理由拒絕提供或屆期仍未提供。
三、驗證合格產品因瑕疵造成重大傷害或危害。
四、產品未符合標示規定，經通知限期改正，屆期未改正。
五、未依第十四條規定期限保存經型式驗證之產品符合性聲明書及技術文件。
六、違反第十七條規定，產品與型式驗證合格證明書所載不符，經通知限期改正，屆期未改正完成。
七、經依第十八條規定，限期依修正後驗證標準換發型式驗證合格證明書，屆期未完成。
八、驗證合格產品生產廠場不符合製造階段之符合性評鑑程序。
九、未繳納驗證規費，經通知限期繳納，屆期未繳納。
十、產品經公告廢止實施型式驗證。
十一、其他經中央主管機關認定違規情節重大者。