Regulations Governing the Registration of Safety Information for Machinery, Equipment and Tools Article 5-1
Where the import of the products is restricted due to border control measures, the importer may apply to the central competent authority for prior-release under one of the following circumstances:1. an application has been made to the verification body, certification body or testing laboratories accredited by accreditation bodies for performing testing against the safety standards and the certificate is not issued yet, or2. other special situations where prior release of the product is necessary and approval is obtained from the central competent authority.The relevant provisions specified in the Regulations Governing the Application for Prior Release of Mechanical Products shall apply mutatis mutandis to the application, follow-up, check and surveillance of prior release mentioned in the preceding paragraph.
中文原文 機械設備器具安全資訊申報登錄辦法第5-1條
輸入者因其輸入之產品被列入邊境管理受輸入限制，而有下列情形之一者，得向中央主管機關申請先行放行：
一、已向國內檢定機構、驗證機構或認證組織認證之檢測實驗室，申請輸入產品符合安全標準之檢測試驗，尚未取得合格證明文件。
二、其他特殊情形，有先行放行之必要，並經向中央主管機關申請核准。
前項先行放行之申請、追蹤、查核及監督管理，準用機械類產品申請先行放行辦法相關規定。
一、已向國內檢定機構、驗證機構或認證組織認證之檢測實驗室，申請輸入產品符合安全標準之檢測試驗，尚未取得合格證明文件。
二、其他特殊情形，有先行放行之必要，並經向中央主管機關申請核准。
前項先行放行之申請、追蹤、查核及監督管理，準用機械類產品申請先行放行辦法相關規定。