Regulations for Safety Inspection of Existing Hazardous Machines and Equipment Article 2
The existing hazardous machines and equipment as referred to in these Regulations are listed as follows:1. Those that have already been installed before the date when Occupational Safety and Health Act came into force, and that have currently not been qualified by the inspection.2. Those that have already been installed before the date when the Regulations for Safety Inspection of Hazardous Machines and Equipment were promulgated and became effective, and that have currently not been qualified by the inspection.3.. Those that have already been installed before the date when the construction specifications were regulated by the relevant national standards or the hazardous machines and equipment regulations, and that have currently not been qualified by the inspection. 4. Those that have already been installed before the date when the central competent authority designates the applicable foreign inspection standards, and that have currently not been qualified by the inspection.The requirements in the Regulations for Safety Inspection of Hazardous Machines and Equipment shall be applied, for any not stipulated in these Regulations,.
中文原文 既有危險性機械及設備安全檢查規則第2條
本規則所稱既有危險性機械及設備如下：
一、職業安全衛生法施行前，已設置且目前未經檢查合格者。
二、危險性機械及設備安全檢查規則施行前，已設置且目前未經檢查合格者。
三、國家標準或危險性機械及設備法規規範相關構造規格前，已設置且目前未經檢查合格者。
四、中央主管機關指定適用國外檢查標準前，已設置且目前未經檢查合格者。
本規則未規定者，適用危險性機械及設備安全檢查規則之規定。
一、職業安全衛生法施行前，已設置且目前未經檢查合格者。
二、危險性機械及設備安全檢查規則施行前，已設置且目前未經檢查合格者。
三、國家標準或危險性機械及設備法規規範相關構造規格前，已設置且目前未經檢查合格者。
四、中央主管機關指定適用國外檢查標準前，已設置且目前未經檢查合格者。
本規則未規定者，適用危險性機械及設備安全檢查規則之規定。