Regulations for Safety Inspection of Hazardous Machines and Equipment Article 64
The completion inspection of hoisting cages shall include structure and performance inspection, load test and other necessary inspections.The load test stipulated in the previous paragraph is to place the load on the worktable for ascending test in rated speed or descending test in allowable descending speed etc. However, those cannot ascend shall only receive the descending test.For the inspection stipulated in paragraph 1, the inspecting organization shall exempt the imported equipment with corresponding inspection certifications from all or any of the inspections stipulated in this Article.
中文原文 危險性機械及設備安全檢查規則第64條
吊籠使用檢查項目為構造與性能之檢查、荷重試驗及其他必要之檢查。
前項荷重試驗，係將相當於該吊籠積載荷重之荷物置於工作台上，於額定速率下實施上升，或於容許下降速率下實施下降等動作試驗。
但不能上升者，僅須實施下降試驗。
第一項之檢查，對外國進口具有相當檢查證明文件者，檢查機構得免除所本條所定全部或一部之檢查。
前項荷重試驗，係將相當於該吊籠積載荷重之荷物置於工作台上，於額定速率下實施上升，或於容許下降速率下實施下降等動作試驗。
但不能上升者，僅須實施下降試驗。
第一項之檢查，對外國進口具有相當檢查證明文件者，檢查機構得免除所本條所定全部或一部之檢查。