Regulations for Safety Inspection of Hazardous Machines and Equipment Article 117
If the alteration of the Category Ι pressure vessel results in alteration of the body, header, end plate, tamina tectalis or reinforcement support, the owner or the employer shall apply at the local inspecting organization for the alteration inspection.The inspecting organization shall record the date of inspection, altered parts and results of the inspection on the original qualification certificate of the Category Ι pressure vessel for the Category Ι pressure vessels qualified in the completion testIf over 1/3 of the body or header of the Category Ι pressure vessel is to be altered or the end plate and pipe sheet are to be entirely altered, the alteration shall be carried out according to stipulations of Article 95.
中文原文 危險性機械及設備安全檢查規則第117條
第一種壓力容器經修改致其胴體、集管器、端板、管板、頂蓋板、補強支撐等有變動者，所有人或雇主應向所在地檢查機構申請變更檢查。
第一種壓力容器經變更檢查合格者，檢查員應在原檢查合格證記事欄內記載檢查日期、變更部分及檢查結果。
第一種壓力容器之胴體或集管器經修改達三分之一以上，或其端板、管板全部修改者，應依第九十五條規定辦理。
第一種壓力容器經變更檢查合格者，檢查員應在原檢查合格證記事欄內記載檢查日期、變更部分及檢查結果。
第一種壓力容器之胴體或集管器經修改達三分之一以上，或其端板、管板全部修改者，應依第九十五條規定辦理。