Regulations for Safety Inspection of Hazardous Machines and Equipment Article 11
The Manufacturer shall be responsible for executing the quality control and quality assurance measures.The involved equipment and personnel shall comply with the requirements as stipulated below:1. Universal testing machines and other as-required inspection equipment including radiographic inspection facility shall be in the possession of the Manufacturer .2. The chief designer shall meet the one of the qualification requirements as shown below:(1) Registered professional engineer relating to mechanical discipline.(2) College graduate majored in mechanical engineering related disciplines together with over five ( 5 ) years of experience in design, manufacture or inspection of the machinery subject totype inspections.(3) Vocational high school graduate majored in mechanics related disciplines together with overeight ( 8 ) years of experience in design, manufacture or inspection of machinery subject to type inspections.(4) Senior technician with over twelve ( 12 ) years of experience in design, manufacture or inspection of machinery subject to type inspections.3. The construction director shall meet one of the qualification requirements as shown below:(1) College graduate majored in mechanical engineering related disciplines together with over three (3) years of experience in design, manufacture or inspection of machinery subject tor type inspections.(2) Vocational high school graduate majored in mechanics related disciplines together with over six (6) years of experience in design, manufacture or inspection of machinery subject tor type inspections.(3) Senior technician with over ten (10) years of experience in design, manufacture or inspection of machinery subject to type inspections.If the inspection equipment as mentioned in Item 1 of the preceding Paragraph can be ready for use anytime on borrowership or co-ownership basis, , the inspecting organization may deem that the Manufacturer is in possession of the said equipment.If the Manufacturer has mandated a qualified person to serve as the chief designer as mentioned in the proceeding Items (1) and (2), the inspecting organization may deem that the said person has been stationed.
中文原文 危險性機械及設備安全檢查規則第11條
製造人應實施品管及品保措施，其設備及人員並應合於下列規定：
一、具備萬能試驗機、放射線試驗裝置等檢驗設備。
二、主任設計者應合於下列資格之一：
（一）具有機械相關技師資格者。
（二）大專機械相關科系畢業，並具五年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
（三）高工機械相關科組畢業，並具八年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
（四）具有十二年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
三、施工負責人應合於下列資格之一：
（一）大專機械相關科系畢業，並具三年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
（二）高工機械相關科組畢業，並具六年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
（三）具有十年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
前項第一款之檢驗設備能隨時利用，或與其他事業單位共同設置者，檢查機構得認定已具有該項設備。
第一項第二款之主任設計者，製造人已委託具有資格者擔任，檢查機構得認定已符合規定。
一、具備萬能試驗機、放射線試驗裝置等檢驗設備。
二、主任設計者應合於下列資格之一：
（一）具有機械相關技師資格者。
（二）大專機械相關科系畢業，並具五年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
（三）高工機械相關科組畢業，並具八年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
（四）具有十二年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
三、施工負責人應合於下列資格之一：
（一）大專機械相關科系畢業，並具三年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
（二）高工機械相關科組畢業，並具六年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
（三）具有十年以上型式檢查對象機具相關設計、製造或檢查實務經驗者。
前項第一款之檢驗設備能隨時利用，或與其他事業單位共同設置者，檢查機構得認定已具有該項設備。
第一項第二款之主任設計者，製造人已委託具有資格者擔任，檢查機構得認定已符合規定。