Amendment to the Fuel Economy Standards and Regulations on Vehicle Inspection and Administration Article 22
22.1 For any vehicle which does not meet the Energy Efficiency Standards in respect to the results of the conformity test provided in Article 4, Article 5 and Article 6, the entity who applied for the type approval test may apply for a retest. The retest shall be performed according to the following procedures:22.1.1 The results of three retests for the original sample test vehicle shall be averaged to a single value (hereinafter referred to Y).22.1.2 Y and all of the one-time retest results for each vehicle requested for retesting by the application entity and selected by the Competent Authority shall be averaged to determine a single value (hereinafter referred to X).22.1.3 In the event that the difference of X and the product of statistical parameter times the standard deviation is not smaller than the Energy Efficiency Standards, the vehicles covered by the application shall be regarded as meeting the Energy Efficiency Standards. The standard deviation is calculated by the following equation:22.2 In the event that the entity does not apply for retesting, or the results of the retesting do not meet the Energy Efficiency Standards under this Article, the certificate of conformity in respect to the vehicle or the model of vehicle covered by the certificate shall be annulled. The Competent Authority shall forthwith withhold from the entity the right to sell the vehicles and order the entity to take actions to improve the energy efficiency of the vehicles. The Transportation Management Authority shall not issue vehicle licenses to the vehicles of the model concerned or to any entity who commits a breach of Article 18 as well.22.3 The entity applying for a retest as described in Paragraph 22.1 of this Article shall deliver the vehicles to the Accredited Agency appointed by the Competent Authority.ARTICLE 22.PDF
中文原文 車輛容許耗用能源標準及檢查管理辦法第22條
（因條文排版無法完整呈現內容，請詳閱完整條文檔案）廠商製造或進口之車輛經新車抽測未達能效標準規定者，由原申請車型能效標準測試廠商向中央主管機關另申請複測，並按下列方式辦理：
一、原測試之車輛依測試方法再測三次，取其算術平均數（Ｙ）。
二、自同車型車輛中任選廠商申請之複測車輛數，依測試方法各測一次，所獲之各測試值再與（Ｙ）取算術平均數（Ｘ）。
三、算術平均數（Ｘ）減去統計參數與標準差之乘積不小於能效標準值者，為合格。
其中標準差之計算公式與統計參數之值如下：┌─────────────│2│（測試值–算術平均數X）標準差＝│Σ───────────│取樣數–1│ˇ┌─┬──┬──┬──┬──┬──┬──┬──┬──┬──┐│取│2│3│4│5│6│7│8│9│10││樣│││││││││││數││││││││││├─┼──┼──┼──┼──┼──┼──┼──┼──┼──┤│統│0.97│0.61│0.48│0.42│0.37│0.34│0.31│0.29│0.27││計│3│3│9│1│6│2│7│6│9││參│││││││││││數││││││││││├─┼──┼──┼──┼──┼──┼──┼──┼──┼──┤│取│11│12│13│14│15│16│17│18│19││樣│││││││││││數││││││││││├─┼──┼──┼──┼──┼──┼──┼──┼──┼──┤│取│0.26│0.25│0.24│0.23│0.22│0.21│0.21│0.20│0.19││樣│5│3│2│3│4│6│0│3│8││數││││││││││└─┴──┴──┴──┴──┴──┴──┴──┴──┴──┘0.860當取樣數≧20統計參數＝────────┌──────│取樣數ˇ未依前項規定申請複測或經複測結果仍未達前項第三款能效標準規定者，中央主管機關應廢止其車型耗能證明，並立即命其停止銷售並作改善，在未改善前交通主管機關對該車型之車輛不予發照。
其不依第十八條第一項、第二項規定辦理者，亦同。
第一項廠商申請複測之車輛應送中央主管機關指定之認可機構辦理測試。
一、原測試之車輛依測試方法再測三次，取其算術平均數（Ｙ）。
二、自同車型車輛中任選廠商申請之複測車輛數，依測試方法各測一次，所獲之各測試值再與（Ｙ）取算術平均數（Ｘ）。
三、算術平均數（Ｘ）減去統計參數與標準差之乘積不小於能效標準值者，為合格。
其中標準差之計算公式與統計參數之值如下：┌─────────────│2│（測試值–算術平均數X）標準差＝│Σ───────────│取樣數–1│ˇ┌─┬──┬──┬──┬──┬──┬──┬──┬──┬──┐│取│2│3│4│5│6│7│8│9│10││樣│││││││││││數││││││││││├─┼──┼──┼──┼──┼──┼──┼──┼──┼──┤│統│0.97│0.61│0.48│0.42│0.37│0.34│0.31│0.29│0.27││計│3│3│9│1│6│2│7│6│9││參│││││││││││數││││││││││├─┼──┼──┼──┼──┼──┼──┼──┼──┼──┤│取│11│12│13│14│15│16│17│18│19││樣│││││││││││數││││││││││├─┼──┼──┼──┼──┼──┼──┼──┼──┼──┤│取│0.26│0.25│0.24│0.23│0.22│0.21│0.21│0.20│0.19││樣│5│3│2│3│4│6│0│3│8││數││││││││││└─┴──┴──┴──┴──┴──┴──┴──┴──┴──┘0.860當取樣數≧20統計參數＝────────┌──────│取樣數ˇ未依前項規定申請複測或經複測結果仍未達前項第三款能效標準規定者，中央主管機關應廢止其車型耗能證明，並立即命其停止銷售並作改善，在未改善前交通主管機關對該車型之車輛不予發照。
其不依第十八條第一項、第二項規定辦理者，亦同。
第一項廠商申請複測之車輛應送中央主管機關指定之認可機構辦理測試。