Regulations Governing Verification and Inspection of Measuring Instruments Article 21
Under any of the following circumstances, the verification agency (institution) shall remove the verification and inspection compliance marks (including the corresponding seals) from the verified legal measuring instruments, but in case of multi-instruments sharing a seal and at least one of them passed inspection or verification the seal shall be kept:1.Where they do not pass re-verification; or2.Where they do not pass inspection.The measuring instruments that do not pass inspection as referred in the preceding Paragraph shall be attached with markings of stopping use.
中文原文 度量衡器檢定檢查辦法第21條
經檢定合格之法定度量衡器，有下列情形之一者，檢定機關（構）應去除其曾經檢定及檢查合格之印證。
但使用共同封印之法定度量衡器，有一具以上合格者，不去除其封印：
一、重新檢定不合格。
二、經檢查不合格。
前項經檢查不合格之法定度量衡器，並另加貼停止使用之標示。
但使用共同封印之法定度量衡器，有一具以上合格者，不去除其封印：
一、重新檢定不合格。
二、經檢查不合格。
前項經檢查不合格之法定度量衡器，並另加貼停止使用之標示。