Regulations Governing Implementation of Voluntary Product Certification Article 21
The certificate body shall rescind the product certificate and shall require the certificate holder to return the certificate if any of the following situations occurs:1. Where the correction on certification mark is not accomplished as required in Paragraph 2 of Article 11 within a given time limit.2. Where the certificate holder hasn’t accomplished correction as required in Paragraph 2 of Article 12 within a given time limit, or the products manufactured during the beginning of the correction period to the date of re-inspection of proving the operation of the production premise is in compliance with relevant regulations are still affixed with certification mark.3. Where the commodities purchased or sampled, according to Article 13, are inspected and found not to be in conformity with the certification standards or still can not meet the requirements after re-inspection.4. Having violated the provision of Paragraph 2 of Article 14 concerning evading, impeding or refusing the inspection.5. Where the commodity has failed to conform to the amended or revised certification standards for replacing the certificate within a given time limit as required by the certification body according to Article 15.6. Where the certificate holder hasn’t applied to the certification body for approval in accordance with Article 17.7. Where the certificate holder hasn’t applied for replacement of the original certificate in accordance with Articles 18 within a given time limit, even after certificate holder has been noticed to do so.8. Where the certificate holder hasn’t paid the certification fee, even after the certificate holder has been noticed to do so within the given time limit.9. Where the product certificate is used beyond the scope that the product certificate is granted.10. Where a defect of the commodity has caused severe injury to any person or the hazard to public safety.11. Where the certificate holder applies for rescission of the product certificate or where the commodity subject to product certification has been rescinded by a public notice.12. Where the registration document of the company, business, factory, other equivalent incorporation registration documents or identity document has been revoked, rescinded or deregistered by the responsible government agency.13. Where the company has been disincorporated or closed.
中文原文 自願性產品驗證實施辦法第21條
有下列情事之一者，驗證機關（構）應廢止其產品驗證，並追繳證書：
一、未依第十一條第二項規定於期限內完成標示之改正。
二、未依第十二條第二項規定於期限內完成工廠之改正，或於改正期間開始至再檢查符合規定前所產製之產品使用產品驗證標誌。
三、經第十三條購樣或取樣測試結果不符合驗證標準或經複驗仍不符合。
四、違反第十四條第二項不得規避、妨礙或拒絕之規定。
五、經依第十五條規定，限期依修正或變更後驗證標準換發產品驗證證書，屆期未完成。
六、未依第十七條規定向驗證機關（構）申請核准。
七、未依第十八條規定於期限內申請換發新證書，經通知仍未申請。
八、未繳納產品驗證規費，經限期繳納，屆期未繳納。
九、未依產品驗證證書範圍使用。
十、產品因瑕疵造成人員重大傷害或危害公共安全。
十一、自行申請廢止產品驗證或適用產品驗證之產品經公告廢止。
十二、公司登記、商業登記、工廠登記或其他相當之設立登記文件及身分證明文件經主管機關撤銷、廢止或註銷。
十三、公司解散或商號歇業。
一、未依第十一條第二項規定於期限內完成標示之改正。
二、未依第十二條第二項規定於期限內完成工廠之改正，或於改正期間開始至再檢查符合規定前所產製之產品使用產品驗證標誌。
三、經第十三條購樣或取樣測試結果不符合驗證標準或經複驗仍不符合。
四、違反第十四條第二項不得規避、妨礙或拒絕之規定。
五、經依第十五條規定，限期依修正或變更後驗證標準換發產品驗證證書，屆期未完成。
六、未依第十七條規定向驗證機關（構）申請核准。
七、未依第十八條規定於期限內申請換發新證書，經通知仍未申請。
八、未繳納產品驗證規費，經限期繳納，屆期未繳納。
九、未依產品驗證證書範圍使用。
十、產品因瑕疵造成人員重大傷害或危害公共安全。
十一、自行申請廢止產品驗證或適用產品驗證之產品經公告廢止。
十二、公司登記、商業登記、工廠登記或其他相當之設立登記文件及身分證明文件經主管機關撤銷、廢止或註銷。
十三、公司解散或商號歇業。