Regulations Governing Implementation of Voluntary Product Certification Article 12
The certification body may conduct a non-routine factory inspection to the production premises of the certified commodity to which the Factory Inspection Module is applicable. The factory inspection shall be undertaken at least once a year and the result shall be transformed into the factory inspection report, which will be delivered to the certificate holder.After the factory inspection stipulated by the preceding Paragraph but the result fails to comply with the relevant regulations, the certification body shall give notice of requiring the applicant to do necessary correction in a given time limit. The deadline for correction shall not exceed three months and the certification body shall conduct an inspection again while the deadline expires. From the beginning of the correction period to the date of re-inspection of proving the operation of the production premise is in compliance with relevant regulations, the applicant is not allowed to affix the certification mark on the related products.
中文原文 自願性產品驗證實施辦法第12條
驗證機關（構）對適用工廠檢查模式且經驗證產品之生產廠場，得實施不定期工廠檢查，每年至少實施一次；其結果應作成報告書，送達該證書名義人。
經前項檢查不符合規定者，驗證機關（構）應通知限期改正，改正期限不得逾三個月，屆期應由驗證機關（構）再實施檢查；於改正期間開始至再檢查符合規定前所產製產品，不得使用產品驗證標誌。
經前項檢查不符合規定者，驗證機關（構）應通知限期改正，改正期限不得逾三個月，屆期應由驗證機關（構）再實施檢查；於改正期間開始至再檢查符合規定前所產製產品，不得使用產品驗證標誌。