Regulations Governing the CNS Mark Article 3
Products included in the CNS Mark Product List as mentioned in the previous Article may be allowed to use the CNS Mark if they meet any one of the following requirements:1.Where the plant has obtained the quality management system (hereinafter referred to as “QMS”) certificate issued by a QMS certification body located in Taiwan or in the same country as the plant that is recognized by the standards authority to demonstrate compliance with CNS 12681 (ISO 9001) (hereinafter referred to as the “recognized QMS certification body”), and the products meet relevant national standards after testing.2.Where the plant has obtained the factory inspection report issued by the standards authority or a factory inspection body located in the same country as the plant (hereinafter referred to as “the factory inspection bodies”) that is recognized by the standards authority, and the products meet relevant national standards after testing.For each product in the CNS Mark Product List, the standards authority shall announce whether the QMS requirement or the factory inspection requirement specified in Subparagraphs 1 and 2 respectively of the preceding Paragraph is applied.The QMS certificate and the factory inspection report specified in Subparagraphs 1 and 2 respectively of the preceding Paragraph shall bear the accreditation logo of the accreditation body.The accreditation body specified in the preceding Paragraph refers to the accreditation body in Taiwan or located in the same country as the plant, which is a member of the Mutual Recognition Arrangement (MRA) of the International Laboratory Accreditation Cooperation (ILAC), the International Accreditation Forum, Inc. (IAF) or the Asia Pacific Accreditation Cooperation (APAC).
中文原文 正字標記管理規則第3條
適用前條正字標記品目之產品，符合下列規定之一者，得准予使用正字標記：
一、工廠取得標準專責機關認可之我國或當地國品質管理驗證機構（以下簡稱認可品管驗證機構）依CNS12681（ISO9001）評鑑核發之品質管理（以下簡稱品管）系統驗證證書，且產品經檢驗符合國家標準。
二、工廠取得標準專責機關或其認可之我國或當地國工廠檢查機構（以下簡稱工廠檢查機關（構））核發之工廠檢查報告，且產品經檢驗符合國家標準。
正字標記品目適用前項第一款品管制度或第二款工廠檢查模式，由標準專責機關指定公告之。
第一項第一款品管系統驗證證書及第二款工廠檢查機構所核發之工廠檢查報告，應標有認證機構之認證標誌。
前項所稱認證機構，指我國或當地國已簽署國際實驗室認證聯盟、國際認證論壇或亞太認證聯盟相互承認協定之認證機構。
一、工廠取得標準專責機關認可之我國或當地國品質管理驗證機構（以下簡稱認可品管驗證機構）依CNS12681（ISO9001）評鑑核發之品質管理（以下簡稱品管）系統驗證證書，且產品經檢驗符合國家標準。
二、工廠取得標準專責機關或其認可之我國或當地國工廠檢查機構（以下簡稱工廠檢查機關（構））核發之工廠檢查報告，且產品經檢驗符合國家標準。
正字標記品目適用前項第一款品管制度或第二款工廠檢查模式，由標準專責機關指定公告之。
第一項第一款品管系統驗證證書及第二款工廠檢查機構所核發之工廠檢查報告，應標有認證機構之認證標誌。
前項所稱認證機構，指我國或當地國已簽署國際實驗室認證聯盟、國際認證論壇或亞太認證聯盟相互承認協定之認證機構。