Standards for Establishing Places for Manufacturing, Storing, Processing Public Hazardous Substances and Flammable Pressurized Gases, and Regulations on Safety Control of such Places Article 46
The safety management of the manufacturing place, the storage place, and the processing place for the Six Materials shall meet the following requirements:1.The storage or processing of public hazardous materials shall not exceed the regulated quantity.2.Fire sources are strictly prohibited.3.Empty boxes, lining paper, plastic bags, paper boxes, and other packaging materials or other flammable and explosive materials shall not be left over after regular cleaning.4.Containers used for storing or processing public hazardous materials shall not be susceptible to damage, corrosion, or cracks according to the materials' characteristics, and shall have security measures to prevent tumbling, falling, impacting, squeezing, or pulling.5.When repairing equipment, mechanical appliances, or containers that may contain public hazardous material residues, the public hazardous materials shall be completely removed first at a safe location.6.Unrelated personnel are strictly forbidden from entering.7.If public hazardous materials accumulate in liquid collection facilities or within oil-water separation devices, they shall be cleaned whenever necessary.8.Disposed public hazardous materials shall be cleaned whenever necessary.9.Public hazardous materials shall be handled with suitable temperature, humidity, and pressure.10.Equipment that is prone to produce sparks shall not be used in sites that accumulate flammable vapor or dust.11.Designated personnel shall be appointed to conduct monthly self-inspections on the location, construction, and equipment of the site, and inspection records shall be kept for at least a year.
中文原文 公共危險物品及可燃性高壓氣體製造儲存處理場所設置標準暨安全管理辦法第46條
六類物品製造、儲存及處理場所，其安全管理應遵守下列規定：
一、儲存或處理公共危險物品，不得超過規定之數量。
二、嚴禁火源。
三、經常整理及清掃，不得放置空紙箱、內襯紙、塑膠袋、紙盒等包裝用餘材料，或其他易燃易爆之物品。
四、儲存或處理公共危險物品，應依其特性使用不會破損、腐蝕或產生裂縫之容器，並應有防止傾倒之固定措施，避免倒置、掉落、衝擊、擠壓或拉扯。
五、維修可能殘留公共危險物品之設備、機械器具或容器時，應於安全處所將公共危險物品完全清除後為之。
六、嚴禁無關人員進入。
七、集液設施或油水分離裝置內如有積存公共危險物品時，應隨時清理。
八、廢棄之公共危險物品應適時清理。
九、應使公共危險物品處於合適之溫度、溼度及壓力。
十、有積存可燃性蒸氣或粉塵之虞場所，不得使用易產生火花之設備。
十一、指派專人每月對場所之位置、構造及設備自主檢查，檢查紀錄至少留存一年。
一、儲存或處理公共危險物品，不得超過規定之數量。
二、嚴禁火源。
三、經常整理及清掃，不得放置空紙箱、內襯紙、塑膠袋、紙盒等包裝用餘材料，或其他易燃易爆之物品。
四、儲存或處理公共危險物品，應依其特性使用不會破損、腐蝕或產生裂縫之容器，並應有防止傾倒之固定措施，避免倒置、掉落、衝擊、擠壓或拉扯。
五、維修可能殘留公共危險物品之設備、機械器具或容器時，應於安全處所將公共危險物品完全清除後為之。
六、嚴禁無關人員進入。
七、集液設施或油水分離裝置內如有積存公共危險物品時，應隨時清理。
八、廢棄之公共危險物品應適時清理。
九、應使公共危險物品處於合適之溫度、溼度及壓力。
十、有積存可燃性蒸氣或粉塵之虞場所，不得使用易產生火花之設備。
十一、指派專人每月對場所之位置、構造及設備自主檢查，檢查紀錄至少留存一年。