Regulations on the Scope of Inspection and on the Certification of Authorized Inspection Agencies for Nuclear Reactor Facilities Article 4
The scope of inspection activities during the construction phase shall include the following:1. Reviewing a licensee’s quality assurance program and verifying its implementation.2. Reviewing certified material documentation.3. Witnessing or verifying the manufacturing and installation processes, welding, heat treatment and non-destructive testing activities.4. Witnessing the final pressure testing.5. Ensuring the construction report of the primary containment structure be reviewed and signed off by the designer liable and be approved by the licensee.6. Witnessing selected examinations.7. Ensuring the applicable design specifications and the design report be certified by a relevant licensed professional engineer.8. Ensuring code data reports of the pressure safety/relief valve and vacuum breaker be certified by the party liable.9. Verifying materials specified for non-destructive testing and qualification of the personnel.10. Certifying the licensee’s code data reports.
中文原文 核子反應器設施監查工作範圍及監查機構認可辦法第4條
興建期間監查作業範圍如下：
一、審查經營者之品質保證方案，並查證其執行。
二、審查驗證材料證明文件。
三、見證或查證製造與安裝製程、銲接、熱處理及非破壞檢測作業。
四、見證最終壓力測試。
五、確認一次圍阻體結構施工報告經權責設計機構審查、簽證及經營者核定。
六、見證經選定之檢驗作業。
七、確認設計規範及設計報告經相關持照專業工程師簽證。
八、確認壓力及真空釋放閥數據報告經相關權責機構簽證。
九、查證非破壞檢測之材料及人員資格。
十、簽證經營者數據報告書。
一、審查經營者之品質保證方案，並查證其執行。
二、審查驗證材料證明文件。
三、見證或查證製造與安裝製程、銲接、熱處理及非破壞檢測作業。
四、見證最終壓力測試。
五、確認一次圍阻體結構施工報告經權責設計機構審查、簽證及經營者核定。
六、見證經選定之檢驗作業。
七、確認設計規範及設計報告經相關持照專業工程師簽證。
八、確認壓力及真空釋放閥數據報告經相關權責機構簽證。
九、查證非破壞檢測之材料及人員資格。
十、簽證經營者數據報告書。