Administrative Regulations for Radioactive Material and Equipment Capable of Producing Ionizing Radiation and Associated Practice Article 26
Paragraph 26.1When the radioactive material for which the registration has been approved is to be modified, the facility operators shall fill out an application form before modification and enclose the following documents to the competent authority for review and approval, after which a modification permission will be issued:1.workplace floor plans and shielding planning; and2.photocopies of the relevant operating personnel credentials; and3.the original registration for useParagraph 26.2Only after the facility operators have obtained the modification permission may the modification work proceed in accordance with the approved workplace floor plans and shielding planning. Within 30 days after the work is completed, the following documents shall be enclosed to the competent authority for review, after which a registration will be approved:1.survey report; and2.for sealed radioactive material in conformity with the stipulations referred to in Paragraph 54.1, a smear test report shall be submitted.Paragraph 26.3The facility operators who have the registration approved by the competent authority for equipment capable of producing ionizing radiation shall, within 30 days after the modification work is completed, fill out an application form and the following information, enclosed to the competent authority for review and approval, after which a registration will be approved:1.name and certificate number of the relevant operating personnel credentials.2.survey report related information and radiation detection data.Paragraph 26.4If, after modification, the energy level of the equipment capable of producing ionizing radiation or the total activity of the radioactive material reaches the level stipulated that the permit shall be applied for, then matters shall proceed in accordance with the stipulations referred to in Article 22.
中文原文 放射性物質與可發生游離輻射設備及其輻射作業管理辦法第26條
經主管機關同意登記之放射性物質改裝時，設施經營者應於改裝前填具申請書，並檢附下列文件，向主管機關申請審查合格，發給改裝許可：
一、場所平面圖及屏蔽規劃。
二、相關操作人員證明文件影本。
三、原領使用登記證。
設施經營者取得改裝許可後，始得依核准之場所平面圖及屏蔽規劃進行改裝工程。
工程完竣後三十日內，應檢附下列文件，送主管機關審查合格後，同意登記：
一、測試報告。
二、符合第五十四條第一項規定之密封放射性物質者，應提送擦拭報告。
經主管機關同意登記之可發生游離輻射設備改裝完竣後三十日內，設施經營者應填具申請書及下列資料，送主管機關審查合格後，同意登記：
一、相關操作人員資格證明文件名稱及證號。
二、測試報告相關資料及輻射偵檢數據。
可發生游離輻射設備之能量或放射性物質之總活度於改裝後已達應申請許可證之規定者，應依第二十二條規定辦理。
一、場所平面圖及屏蔽規劃。
二、相關操作人員證明文件影本。
三、原領使用登記證。
設施經營者取得改裝許可後，始得依核准之場所平面圖及屏蔽規劃進行改裝工程。
工程完竣後三十日內，應檢附下列文件，送主管機關審查合格後，同意登記：
一、測試報告。
二、符合第五十四條第一項規定之密封放射性物質者，應提送擦拭報告。
經主管機關同意登記之可發生游離輻射設備改裝完竣後三十日內，設施經營者應填具申請書及下列資料，送主管機關審查合格後，同意登記：
一、相關操作人員資格證明文件名稱及證號。
二、測試報告相關資料及輻射偵檢數據。
可發生游離輻射設備之能量或放射性物質之總活度於改裝後已達應申請許可證之規定者，應依第二十二條規定辦理。