Regulations Governing Compliance Approval for Telecommunications Terminal Equipment Article 16
A piece of TTE that has been issued compliance approval certificate and for which the use of compliance approval label or DoC label is licensed shall not be sold until it the following process has been adhered:1. The compliance approval label or DoC label and model number are indicated on the body where it is highly visible, and the mark of the competent authority on the package box. For final products, the compliance approval label of non-plug-and-play restricted communications module and the model number of final product shall be indicated on the body where it is highly visible, and the mark of the competent authority on the package box.2. Warning（s）in traditional Chinese shall be indicated at the location specified by the competent authority in the applicable technical specifications.3. For PLBs, the notification that the holder is obliged to apply for information registration to Maritime Port Bureau, MOTC shall be indicated on the package box and in the user’s manual（or instructions）of the equipment.For difficulty of indicating labels, model number, warnings in traditional Chinese or information registration mentioned in the preceding paragraph, the indication shall be undertaken in a manner approved by the competent authority, provided that the approval of the competent authority is secured.For TTE which is equipped with a built-in screen or must connect to a screen for operations, the label, model number or warnings in traditional Chinese may be replaced with display on screen and the operating instructions shall be provided on package box, or in user’s manual or instructions.For those that are not processed according to the three preceding paragraphs, the competent authority or the original certification body may request for an explanation and correction by a given deadline.For TTE that is for private use and that has been approved, the applicant shall attach the compliance approval label on the TTE body where it is highly visible.
中文原文 電信終端設備審驗管理辦法第16條
電信終端設備取得審驗證明者、被授權使用審驗合格標籤或符合性聲明標籤者，應依下列規定辦理：
一、於本體明顯處標示審驗合格標籤或符合性聲明標籤及其型號，並於包裝盒標示主管機關標章。
最終產品應於本體明顯處標示非隨插即用限制性通信模組之審驗合格標籤及最終產品型號，並於包裝盒標示主管機關標章。
二、依主管機關或相關技術規範規定於指定位置標示正體中文警語。
三、個人定位無線電示標，應於設備之包裝盒及使用手冊（或說明書）標示持有者須向交通部航港局辦理資訊登錄。
前項標籤、型號、正體中文警語或資訊登錄標示顯有困難，經主管機關核准者，應依主管機關核准方式標示。
電信終端設備內建螢幕或須連接螢幕始能操作者，第一項標籤、型號或正體中文警語標示得以螢幕顯示代之，並於包裝盒、使用手冊或說明書載明操作方式。
未依前三項規定辦理者，主管機關或原驗證機構得通知其敘明理由，並令其限期改正。
自用電信終端設備經審驗合格者，申請者應將審驗合格標籤黏貼於電信終端設備本體明顯處。
一、於本體明顯處標示審驗合格標籤或符合性聲明標籤及其型號，並於包裝盒標示主管機關標章。
最終產品應於本體明顯處標示非隨插即用限制性通信模組之審驗合格標籤及最終產品型號，並於包裝盒標示主管機關標章。
二、依主管機關或相關技術規範規定於指定位置標示正體中文警語。
三、個人定位無線電示標，應於設備之包裝盒及使用手冊（或說明書）標示持有者須向交通部航港局辦理資訊登錄。
前項標籤、型號、正體中文警語或資訊登錄標示顯有困難，經主管機關核准者，應依主管機關核准方式標示。
電信終端設備內建螢幕或須連接螢幕始能操作者，第一項標籤、型號或正體中文警語標示得以螢幕顯示代之，並於包裝盒、使用手冊或說明書載明操作方式。
未依前三項規定辦理者，主管機關或原驗證機構得通知其敘明理由，並令其限期改正。
自用電信終端設備經審驗合格者，申請者應將審驗合格標籤黏貼於電信終端設備本體明顯處。