When importing newly manufactured motorcycles or in-use motorcycles from overseas separately under a personal name, the applicant shall submit the following testing reports in place of the Certificate of Conformity for each motorcycle:1. The testing report prepared by the central competent authority-approved testing organization verifying that the motorcycle complies with Article 6 of the Emission Standards (for the deterioration factors, please apply the provisions of Appendix 1).2. If said motorcycle is found by the central competent authority-approved testing organization as not having been equipped with the evaporative emission control system or components thereof, or if the installed evaporative emission control system or components thereof fail to operate effectively such that the motorcycle may cause pollution, then the applicant shall submit the testing report that is issued by the central competent authority-approved testing organization indicating that it complies with Article 7 of the Emission Standards.3. If the central competent authority-approved testing organization cannot test the motorcycle, then the applicant may submit the testing result report that has been evaluated by the central competent authority as meeting the Emission Standards.If an in-use motorcycle imported from overseas is defined as an antique motorcycle in the Regulations Governing Road Traffic Safety, the requirements specified in the preceding paragraph may be exempted.Appendix 1：Exhaust emission testing and regulations applicable for vehicle model inspection.pdf