In-Use Motor Vehicle Recall and Correction Regulation Article 11

For vehicles of an engine family or vehicle model with one of the following conditions, the vehicle manufacturer or importer shall submit a voluntary recall and correction plan, after being approved by the central competent authority, then the manufacturer or importer shall implement the recall and correction plan:11.1. Through self-judgment, the manufacturer has determined that its vehicle may fail to meet the emission standards.11.2. The foreign competent authority or original manufacturer has already announced to initiate a recall program. However, if the vehicle recall is not related to failing to meet the emission standards, or vehicle being installed with defective functionality or defeat emission control devices and the manufacturer or importer has submitted relevant proof documents to the central competent authority for approval to be filed for future reference, then it shall be exempted from this requirement.11.3. The reason for the vehicle failing to meet the emission standards was adopted defective emission control device.As to the conditions described in provision 11.2, the manufacturer or importer shall provide proof documents with descriptions including the original manufacturer initiated correction measures that being reviewed and approved by the foreign competent authority; the number of affected domestic vehicles; expected completion rate of recalled vehicles and period of time required for implementation to the central competent authority for approval and to be filed for future reference. After being approved, the manufacturer or importer shall implement directly the recall and correction measures and not necessary to submit a voluntary recall and correction plan.