Defined below is the review procedure that should be followed by the inspection organization for handling the application defined in the aforementioned inspection report:7.1 The inspection organization shall check the integrity of the document. If any missing or non-compliance is found in the application document, then the inspection organization shall inform the applicant to make a correction and the duration of the correction days shall not be longer than 30 days. If the applicant fails to complete the correction within the specified timeline, then the submitted document will be rejected.7.2 After verifying the document integrity for the application case, the inspection organization shall also check if such document complies with the requirements defined in Appendix 1 and Appendix 2.7.3 If any defect exists in the content of the inspection case, then the inspection organization shall inform the applicant to make a correction and the duration of the correction days shall not be longer than 45 days. If required, the applicant may request for extending the correction period; however, such extension shall be limited to once only. If the applicant fails to complete the correction within the specified timeline, then the inspection organization may conduct the document review.7.4 The inspection organization shall issue the inspection report.When conducting the aforementioned review, the inspection organization may undertake the field and the substantive inspections as required. The aforementioned inspections shall include the monitoring of the testing process being executed by the applicant in the domestic premise or the auditing in the applicant’s manufacturing plant or service location. In this regard, the entire inspection process shall be completed within 30 days.Appendix 1：Exhaust emission testing and regulations applicable for vehicle model inspection.pdfAppendix 2：Documents required and the compliance matters for Certificate of Conformity application.pdf