Feed control act Article 10
For manufacturing, processing, or packaging any feed/feed additive announced by the central competent authority as requiring a permit to do so, the entity engaging in such activity shall apply to the central competent authority for such a permit. Only after the feed/feed additive passes inspection, and only after the Manufacturing license is issued, may the manufacturing, processing, or packaging occur.The central competent authority shall prescribe, from the previous paragraph, the application criteria, procedures, documents to be attached, proof of origin, testing protocols, permit criteria, Manufacturing license issuance/renewal/replacement, and other matters for compliance.The following entities are exempt from needing to apply for and obtain a Manufacturing license as described in paragraph 1:1.A self-manufactured, own-use feed user who has applied to a competent authority at the directly-controlled municipal government or county/city-levels, for a permit; who has been issued a self-manufactured, own-use license; and who manufactures such feed for use with the entity’s own livestock, poultry or aquatic animals.2.A research institution that manufactures or processes feed/feed additives specifically for testing purposes.In terms of components and quantities, self-manufactured, own-use feed in subsection 1 of the previous paragraph shall comply with the quantity limits set by the central competent authority. Where feed additives are used, the sources and uses of feed additives shall be recorded.The central competent authority shall prescribe, from paragraph 3, subsection 1, the application criteria, procedures, documents to be attached, permit criteria, and license issuance/renewal/replacement. The central competent authority shall also prescribe, from the previous paragraph, recording for sources and uses of feed additives, other matters for compliance, and quantity limits.The central competent authority may delegate matters in paragraph 1 regarding handling applications, inspections, issuance of Manufacturing licenses, etc. to competent authorities at the directly-controlled municipal government or county/city-levels.
中文原文 飼料管理法第10條
製造、加工、分裝經中央主管機關公告品目之飼料或飼料添加物者，應向中央主管機關申請許可，該飼料或飼料添加物經檢驗合格，發給製造許可登記證（以下簡稱製造登記證）後，始得製造、加工、分裝。
前項申請要件、程序、應檢附文件、來源證明、檢驗方法、許可條件、製造登記證之核（換、補）發及其他應遵行事項之辦法，由中央主管機關定之。
有下列情形之一者，免依第一項規定申請許可及取得製造登記證：
一、自製自用飼料戶向直轄市或縣（市）主管機關申請許可，並發給自製自用飼料戶登記證後，自製且供給自有家畜、家禽或水產動物之飼料。
二、試驗研究機構製造或加工專供試驗用之飼料、飼料添加物。
前項第一款自製自用飼料戶製造之飼料，其成分及含量應符合中央主管機關所定限量標準；其使用飼料添加物者，應記錄飼料添加物來源及使用情形。
第三項第一款之申請要件、程序、應檢附文件、許可條件、登記證之核（換、補）發、前項飼料添加物來源及使用情形之紀錄與其他應遵行事項之辦法及前項限量標準，由中央主管機關定之。
第一項所定受理申請、檢驗及發給製造登記證等事項，中央主管機關得委辦直轄市或縣（市）主管機關辦理。
前項申請要件、程序、應檢附文件、來源證明、檢驗方法、許可條件、製造登記證之核（換、補）發及其他應遵行事項之辦法，由中央主管機關定之。
有下列情形之一者，免依第一項規定申請許可及取得製造登記證：
一、自製自用飼料戶向直轄市或縣（市）主管機關申請許可，並發給自製自用飼料戶登記證後，自製且供給自有家畜、家禽或水產動物之飼料。
二、試驗研究機構製造或加工專供試驗用之飼料、飼料添加物。
前項第一款自製自用飼料戶製造之飼料，其成分及含量應符合中央主管機關所定限量標準；其使用飼料添加物者，應記錄飼料添加物來源及使用情形。
第三項第一款之申請要件、程序、應檢附文件、許可條件、登記證之核（換、補）發、前項飼料添加物來源及使用情形之紀錄與其他應遵行事項之辦法及前項限量標準，由中央主管機關定之。
第一項所定受理申請、檢驗及發給製造登記證等事項，中央主管機關得委辦直轄市或縣（市）主管機關辦理。