Regulations Governing Inspection of Cutting and Harvesting of Forest Products Article 14
The stamp certifying the relevant forest products inspection shall be prepared by the central competent authority and handed over to the agency conducting such inspection for custody and use. Such stamps include:1.The investigation stamp: used during the harvest volume check to certify the per-tree check of the coniferous trees, broadleaf trees, precious trees, and trees subject to selection cutting or alternate cutting. However, during per-tree checks in simple sampling areas for artificial forest, investigators shall replace the investigation stamps with spray paint, ropes or other simple marking methods.2.The blocking wood inspection stamp: used to certify the investigation of blocking wood, subsidiary materials or trees omitted from previous inspections.3.The demarcation stamp: used to mark the boundaries of the forest products cutting areas.4.The release stamp: used to certify the release inspection.5.The attachment stamp: used to certify an investigation of the harvest and the root plants thereof from theft, unauthorized cutting or mistaken cutting.6.The cutover forest inspection stamp: used to certify the cutover forest inspection following the completion of the cutting and harvesting operation.
中文原文 林產物伐採查驗規則第14條
林產物之查驗印，由中央主管機關鑄造，交由各查驗機關保管使用。
查驗印包括下列各種：
一、調查印：林產物伐採材積調查時，對於針（闊）葉樹之貴重木、擇伐木或間（疏）伐木辦理每木調查之用。
但人工林林相單純採樣區調查者，其樣區內立木實施每木調查時，得以噴漆、繫繩或其他簡易註記方式替代調查印。
二、障礙木查印：調查障礙木、附帶用材或漏查木之用。
三、界木印：標示林產物伐採區域界木之用。
四、放行印：放行木材查驗之用。
五、封查印：調查竊取、擅伐或誤伐木材及其根株之用。
六、跡地檢查印：伐採作業完竣跡地查驗之用。
查驗印包括下列各種：
一、調查印：林產物伐採材積調查時，對於針（闊）葉樹之貴重木、擇伐木或間（疏）伐木辦理每木調查之用。
但人工林林相單純採樣區調查者，其樣區內立木實施每木調查時，得以噴漆、繫繩或其他簡易註記方式替代調查印。
二、障礙木查印：調查障礙木、附帶用材或漏查木之用。
三、界木印：標示林產物伐採區域界木之用。
四、放行印：放行木材查驗之用。
五、封查印：調查竊取、擅伐或誤伐木材及其根株之用。
六、跡地檢查印：伐採作業完竣跡地查驗之用。