Safety Standard of Machinery, Equipment and Tools Article 90
The material of the flange shall have the equivalent tensile strength to FC150 cast irons set in the national standard CNS 2472 "gray iron castings" and withstand distortion.The diameter and the contact width of the grinding wheel in the fixed- side and the moving- side shall be equal except the flange set in Article 94, Attachment figure 3.Attachment figure 3.pdfAttachment figure 3.doc
中文原文 機械設備器具安全標準第90條
緣盤應使用具有相當於國家標準CNS2472「灰口鐵鑄件」所定FC150鐵鑄件之抗拉強度之材料，且不致變形者。
緣盤之直徑及接觸寬度，在固定側與移動側均應等值。
但第九十四條附圖三所定之緣盤，不在此限。
緣盤之直徑及接觸寬度，在固定側與移動側均應等值。
但第九十四條附圖三所定之緣盤，不在此限。