Regulations Governing the Registration of Safety Information for Machinery, Equipment and Tools Article 2
Machinery, equipment or tools (hereinafter referred to as the products) specified in Paragraph 1 of Article 7 as designated by the central competent authority shall be exempted from registration under any of the following circumstances:1. Where they are subject to requirements for inspection, certification, approval or management in accordance with other laws or acts;2. Where they are used for national defense or military purpose, and supported by documents issued by the Ministry of Defense or its directly subordinate agencies;3. Where they are specialized model manufactured in limited amount or imported for purpose of scientific research or testing, provided that approval is granted by the central competent authority;4. Where they are commercial samples or exhibition articles not intended for use or operation, provided that approval is granted by the central competent authority;5. Where they are imported for purpose of re-exported with or without further processing or assembly, provided that approval is granted by the central competent authority; or6. Other special circumstances where exempted from registration is necessary, provided that approval is granted by the central competent authority.
中文原文 機械設備器具安全資訊申報登錄辦法第2條
本法第七條第一項所定中央主管機關指定之機械、設備或器具（以下簡稱產品），有下列情形之一者，得免申報登錄：
一、依其他法律有實施檢查、檢驗、驗證、認可或管理之規定。
二、供國防軍事用途使用，並有國防部或其直屬機關出具證明。
三、限量製造或輸入僅供科技研發、測試用途之專用機型，並經中央主管機關核准。
四、非供實際使用或作業用途之商業樣品或展覽品，並經中央主管機關核准。
五、輸入供加工、組裝後輸出或原件再輸出，並經中央主管機關核准。
六、其他特殊情形，有免申報登錄之必要，並經中央主管機關核准。
一、依其他法律有實施檢查、檢驗、驗證、認可或管理之規定。
二、供國防軍事用途使用，並有國防部或其直屬機關出具證明。
三、限量製造或輸入僅供科技研發、測試用途之專用機型，並經中央主管機關核准。
四、非供實際使用或作業用途之商業樣品或展覽品，並經中央主管機關核准。
五、輸入供加工、組裝後輸出或原件再輸出，並經中央主管機關核准。
六、其他特殊情形，有免申報登錄之必要，並經中央主管機關核准。