Regulations for Safety Inspection of Existing Hazardous Machines and Equipment Article 5

When the Owner's submittal appears lacking of the original documents as required and listed in the preceding Article, the Inspector shall proceed with the inspection in accordance with the following stipulations:1. With respect to those cases where the relevant documents evidenced with the original manufacture's signature are available, the material property and strength may be qualified by review of the said documents. 2. With respect to those cases where the material specification utilized are unclear, the minimum material strength may be considered to be used.3. An overall construction drawing, to be prepared by the Owner, with the dimensions indicated thereon, may be accepted. In case it is difficult to prepare the said overall construction drawing for some portion , the photographs which have the equivalent effectiveness to show the outline, shape and the assembling configuration of the said portion may be accepted to be used. 4. In review of the material strength, the original design standards or the related standards existing at the manufacturing stage may be adopted. 5. With respect to those cases where the original strength calculation report does not appear in a completed form, the strength calculations performed by the Owner for the major components including the truss, jib, loading cage and etc. may be considered to be acceptable.