Regulations for Safety Inspection of Hazardous Machines and Equipment Article 89
In case any of the following situations exists, the Owner/Employer of the boiler shall submit the Inspecting Organization a re-inspection application for qualifying the said boilers:1. The boiler to be used, is imported from foreign countries.2. The boiler to be installed or re-used, has been idle for over one(I) year since the last qualification date of its structure inspection, re-inspection, completion Inspection or periodic inspection of the said boiler.3. The boiler to be re-used, has previously been banned by the Inspection Organization.4. The fixed type boiler to be re-installed, is relocated at a place different from its original location.5. The maximum operation pressure is to be up-rated.6. The heat transfer area is to be changed.For those imported pressure vessels which are documented by the proper corresponding inspection certificates, the Inspecting Organization may grant exemption from all or part of the inspection requirements as stipulated in this Article.
中文原文 危險性機械及設備安全檢查規則第89條
鍋爐有下列各款情事之一者，應由所有人或雇主向檢查機構申請重新檢查：
一、從外國進口。
二、構造檢查、重新檢查、竣工檢查或定期檢查合格後，經閒置一年以上，擬裝設或恢復使用。
三、經禁止使用，擬恢復使用。
四、固定式鍋爐遷移裝置地點而重新裝設。
五、擬提升最高使用壓力。
六、擬變更傳熱面積。
對外國進口具有相當檢查證明文件者，檢查機構得免除本條所定全部或一部之檢查。
一、從外國進口。
二、構造檢查、重新檢查、竣工檢查或定期檢查合格後，經閒置一年以上，擬裝設或恢復使用。
三、經禁止使用，擬恢復使用。
四、固定式鍋爐遷移裝置地點而重新裝設。
五、擬提升最高使用壓力。
六、擬變更傳熱面積。
對外國進口具有相當檢查證明文件者，檢查機構得免除本條所定全部或一部之檢查。