When applying for completion inspection of boilers, the employer shall fill out the Application Form for Completion Inspection of Boilers (Annex 37) and submit the documents shown below:1. Specification of the boiler with the stamp of qualification mark for the structure inspection or re-inspection.2. Map of the installation site of the boiler and peripheral situations.The completion inspection of boilers shall include inspections on the quantity and capacity of safety valves; blowoff test; quantity and locations of level gauges; capacity and quantity of the water supply devices and drainage devices; safety equipment of the water treatment devices and the boilers; installation, foundation, entrance and exit, and safety devices of the boiler room; quantity and dimensions of the pressure gauge; combustion device; and other necessary inspections.The inspecting organization shall issue the Report for Results of Completion Inspection of Boilers (Annex 38) and the Qualification Certificate (Annex 39) to boilers qualified in the completion inspection. The maximum period of validity for the aforesaid documents shall be 1 year.The employer shall hang the aforesaid Qualification Certificate or its photocopy in the boiler room or obvious locations in the workplace.Annex 37 Application Form for Completion Inspection.PDFAnnex 38 Report for Results of Completion Inspection of Boilers.PDFAnnex 39 Qualification Certificate.PDF