Regulations for Safety Inspection of Hazardous Machines and Equipment Article 114
In case any of the following situations exists, the Owner/Employer of the category Ι pressure vessel shall submit the Inspecting Organization a re-inspection application for the said category Ι pressure vessel:1. The pressure vessel to be used is imported from foreign countries.2. The pressure vessel to be installed or re-used, has been idle for over one(I) year since the last qualification date of its structure inspection, re-inspection, completion Inspection or periodic inspection of the said boiler., except for those approved by the Inspection Organization,3. The pressure vessel to be re-used, has previously been banned by the Inspection Organization.4. The fixed type category Ιpressure vessel to be re-installed, is relocated at a place different from its original location.5. The maximum operation pressure is to be up-rated.6. The category of the contents to be changed.In case the equipment category of the categoryΙ pressure vessel is changed to be a specific equipment for high pressure gases resulting from the reason as per Item 6 of the preceding Paragraph 1, the said pressure vessel shall be inspected in compliance with requirements related ro the specific equipment for the high pressure gases.For those imported pressure vessels which are documented by the proper corresponding inspection certificates, the Inspecting Organization may grant exemption from all or part of the inspection requirements as stipulated in this Article.
中文原文 危險性機械及設備安全檢查規則第114條
第一種壓力容器有下列各款情事之一者，應由所有人或雇主向檢查機構申請重新檢查：
一、從外國進口。
二、構造檢查、重新檢查、竣工檢查或定期檢查合格後，經閒置一年以上，擬裝設或恢復使用。
但由檢查機構認可者，不在此限。
三、經禁止使用，擬恢復使用。
四、固定式第一種壓力容器遷移裝置地點而重新裝設。
五、擬提升最高使用壓力。
六、擬變更內容物種類。
因前項第六款致第一種壓力容器變更設備種類為高壓氣體特定設備者，應依高壓氣體特定設備相關規定辦理檢查。
對外國進口具有相當檢查證明文件者，檢查機構得免除本條所定全部或一部之檢查。
一、從外國進口。
二、構造檢查、重新檢查、竣工檢查或定期檢查合格後，經閒置一年以上，擬裝設或恢復使用。
但由檢查機構認可者，不在此限。
三、經禁止使用，擬恢復使用。
四、固定式第一種壓力容器遷移裝置地點而重新裝設。
五、擬提升最高使用壓力。
六、擬變更內容物種類。
因前項第六款致第一種壓力容器變更設備種類為高壓氣體特定設備者，應依高壓氣體特定設備相關規定辦理檢查。
對外國進口具有相當檢查證明文件者，檢查機構得免除本條所定全部或一部之檢查。