Vehicle Safety Type Approval Management Regulations Article 17
This English translation was last updated on 2025-12-31, but the Chinese text was amended on 2026-06-26. Later amendments may not be reflected in the translation — please refer to the Chinese text.
The chassis manufactured by domestic chassis manufacturers or imported by importer to construct body in Taiwan have to process the chassis type registration.To process the type of chassis registration, the applicants shall provide following documents to certification institution, the document of application shall have seal the applicant and the duty-person on it or other electronically certified method. After registered by certification institution, certification institution shall issue the registration report：1. The copy of the applicant’s qualification document.(1) For domestic chassis manufacturers, shall provide company registration or commercial registration documents and factory registration documents.(2) For the chassis importer, shall provide company registration or commercial registration documents. Authorized importers have to provide additional authorization documents.2.For the chassis for construction of large passenger vehicles, applicants shall provide the body construction-on-chassis manual.3.The specification list and picture of the chassis type.4. For the chassis of class I and class II large passenger vehicles shall provide the verification documents of durability test of completed vehicle and the main components list for each type of chassis.When there are new Testing Regulations applied to chassis, if the chassis type were registered and used by domestic body maker to construct completed vehicle and been approved, for the same type of chassis which were manufactured or imported but not used to construct completed vehicle before the implementation of new Testing Regulations, the chassis manufacturers, importers or body makers may inventoried the chassis and apply to comply with the original Regulations in Vehicle Safety Testing Directions toward certification institution within 1 month after the implementation date of the new Testing Items.
中文原文 車輛型式安全審驗管理辦法第17條
國內底盤車製造廠製造或進口商進口供國內車身打造廠打造車身之底盤車，應辦理底盤車型式登錄。
辦理前項底盤車型式登錄，應檢附下列資料向審驗機構提出申請，申請資料並應加蓋申請者及其負責人印章或為可證明申請者身分之電子憑證，經審驗機構登錄後，由審驗機構核發登錄報告：
一、申請資格證明文件影本。
（一）國內底盤車製造廠應檢附公司登記證明文件或商業登記證明文件，及工廠登記證明文件。
（二）底盤車進口商應檢附公司登記證明文件或商業登記證明文件，代理商另應檢附授權代理之證明文件。
二、供打造大客車之底盤車應檢附大客車底盤架裝車身施工規範。
三、底盤車型式規格表及圖說。
四、供打造甲、乙類大客車之底盤車應檢附完成車耐久性能測試驗證文件及各型式之底盤主要零件清單。
新增車輛安全檢測基準為底盤車項目時，已依規定完成登錄且已有國內車身打造廠使用打造完成車取得合格證明書之底盤車型式，於新增車輛安全檢測基準實施前已完成製造或進口但尚未使用打造之相同型式底盤車，底盤車製造廠、進口商或車身打造廠得於新增車輛安全檢測基準實施後一個月內，向審驗機構造冊登記申請適用原符合已公告實施之檢測項目。
辦理前項底盤車型式登錄，應檢附下列資料向審驗機構提出申請，申請資料並應加蓋申請者及其負責人印章或為可證明申請者身分之電子憑證，經審驗機構登錄後，由審驗機構核發登錄報告：
一、申請資格證明文件影本。
（一）國內底盤車製造廠應檢附公司登記證明文件或商業登記證明文件，及工廠登記證明文件。
（二）底盤車進口商應檢附公司登記證明文件或商業登記證明文件，代理商另應檢附授權代理之證明文件。
二、供打造大客車之底盤車應檢附大客車底盤架裝車身施工規範。
三、底盤車型式規格表及圖說。
四、供打造甲、乙類大客車之底盤車應檢附完成車耐久性能測試驗證文件及各型式之底盤主要零件清單。
新增車輛安全檢測基準為底盤車項目時，已依規定完成登錄且已有國內車身打造廠使用打造完成車取得合格證明書之底盤車型式，於新增車輛安全檢測基準實施前已完成製造或進口但尚未使用打造之相同型式底盤車，底盤車製造廠、進口商或車身打造廠得於新增車輛安全檢測基準實施後一個月內，向審驗機構造冊登記申請適用原符合已公告實施之檢測項目。