Regulations Governing Type Approval of Commodities Article 6

Applicants shall obtain type test reports in accordance with the following requirements:1. General type test: For type test of electromagnetic compatibility, applicants shall apply to a designated testing laboratory recognized by the BSMI with relevant technical documents and an adequate supply of samples required for testing purpose. For other type tests, applicants shall apply to the inspection authority or a designated testing laboratory recognized by the BSMI with relevant technical documents and an adequate supply of samples required for testing purpose. For commodities that are large in size or complex, the applicant may apply to the BSMI for the testing to be conducted at a specific testing facility.2. Type test of special commodities or commodities of small quantities: Applicants may apply to a domestic or foreign testing laboratory accredited by a laboratory accreditation body or that of an accredited product certification body. The type test may be conducted by the original manufacturer upon approval by the BSMI.If an applicant has been granted the use of other certification marks designated by the BSMI, the certificates of such marks may be presented in place of the type test report and relevant technical documents.
中文原文 商品型式認可管理辦法第6條
申請人取得型式試驗報告應依下列規定辦理:
一、一般型式試驗:電磁相容性型式試驗,應檢具相關技術文件及足夠測試所需之樣品,向標準檢驗局認可之指定試驗室辦理;其他型式試驗,應檢具相關技術文件及足夠測試所需之樣品,向檢驗機關或標準檢驗局認可之指定試驗室辦理。
但大型或系統複雜商品,得向標準檢驗局申請指定場所測試。
二、少量特殊商品型式試驗:得向國內外經實驗室認證機構認可之試驗室或經認證之驗證機構試驗室辦理。
但經標準檢驗局同意者,得由原製造廠辦理。
取得標準檢驗局指定之其他驗證標誌者,得以原驗證標誌登錄資料代替型式試驗報告及相關技術文件。

English translation for reference only; the Chinese text prevails. Not legal advice.