Regulations Governing Type Approval of Commodities Article 16

If the commodity that has been granted type approval is found any of the following instances, its type approval shall be rescinded:1. Where the commodity has failed to conform to the amended or revised inspection standards within a given time limit as required by the competent authority according to Paragraph 2 of Article 9;2. Where the commodity is not recalled within a given time limit, as requested by the inspection authority;3. Where the manufacturer of the commodity has failed to provide samples within a given time limit, without a reasonable explanation;4. Where the commodity was not marked in the manner as required in Articles 11 and 12 of the Act, and the required rectification has not been made within a given time limit or where the commodity was marked falsely or incorrectly;5. Where the type approval was used beyond the granted scope, and the required corrective action has not been finished within a given time limit after receipt of notice;6. Where a defect of the commodity has caused severe injury to any person or is a hazard to public safety;7. Where the nominal holder of the type approval certificate applies for cancellation of the type approval; or8. Where the announcement of the commodity subject to type approval has been rescinded by a public notice.