Regulations Governing the Permission and Management of the Export, Research & Development of Imitation Firearms Article 9
Manufacturers with approval to manufacture imitation firearms and their main components shall comply with the following requirements:1. Key components shall be marked with an irreversible identification code on the site designated by the central competent authority.2. The inside wall of a barrel shall be embedded with irremovable metal rated at HRC 55 to 60 and above on the Rockwell hardness scale.If a manufacturer fails to comply with the requirements of the preceding paragraph, the original approving authority shall issue a notification for corrections that must be fulfilled within a specified period.
中文原文 模擬槍許可及管理辦法第9條
廠商經許可製造模擬槍及其主要組成零件，應遵守下列規定：
一、關鍵零組件以不可回復痕跡之方式於中央主管機關指定位側加設辨識碼。
二、槍管內設洛氏硬度五十五度至六十度以上無法移除之金屬嵌入物。
未依前項規定製造者，原許可機關應通知限期改正。
一、關鍵零組件以不可回復痕跡之方式於中央主管機關指定位側加設辨識碼。
二、槍管內設洛氏硬度五十五度至六十度以上無法移除之金屬嵌入物。
未依前項規定製造者，原許可機關應通知限期改正。